Hi Friends,
I just want to ensure that my multi-WAN setup in my below network environment is effective!!
I referred the multi-WAN documentation , it says "With every new connection to a server on the Internet, the multi-WAN system alternates WAN interfaces. User A could be downloading a large file through WAN #1, while User B is making a voice-over-IP (VoIP) telephone call on WAN #2" .
So my confusion is that from the point of view from ClearOS Machine , it is having only one user ( Router) . So my actual end user's traffic will be divided equally via 2 internet connections ?. Kindly advice
I just want to ensure that my multi-WAN setup in my below network environment is effective!!
I referred the multi-WAN documentation , it says "With every new connection to a server on the Internet, the multi-WAN system alternates WAN interfaces. User A could be downloading a large file through WAN #1, while User B is making a voice-over-IP (VoIP) telephone call on WAN #2" .
So my confusion is that from the point of view from ClearOS Machine , it is having only one user ( Router) . So my actual end user's traffic will be divided equally via 2 internet connections ?. Kindly advice
In Multi-WAN
Location [ View Larger Map ]
Share this post:
Responses (3)
-
Accepted Answer
I think they used "user" in their example. I think what they really mean is one source/destination combination. This means that user 1 can be browsing a web site through one WAN interface and downloading a file through another. I'm not 100% sure but to me this is the more likely scenario.
Is there a reason you are using a router behind ClearOS? The more normal configuration would be to configure the router as a switch (give it a fixed IP on the ClearOS LAN, disable its DHCP sever and connect its LAN to the ClearOS LAN - do not use its WAN). If you need specific elements of the routers functionality such as VoIP then this may not be possible and you may need to connect as you have. -
Accepted Answer
Nick Howitt wrote:
Is there a reason you are using a router behind ClearOS? The more normal configuration would be to configure the router as a switch (give it a fixed IP on the ClearOS LAN, disable its DHCP sever and connect its LAN to the ClearOS LAN - do not use its WAN). If you need specific elements of the routers functionality such as VoIP then this may not be possible and you may need to connect as you have.
That was my thought as well. If not needed then remove the router and let ClearOS do it's thing...
Please login to post a reply
You will need to be logged in to be able to post a reply. Login using the form on the right or register an account if you are new here.
Register Here »