For the life of me I can't get flexshare working.
Even on my local network it still refuses to connect.
This is from FileZilla
Status: Connecting to 10.0.0.1:990...
Status: Connection established, initializing TLS...
Status: Verifying certificate...
Status: TLS connection established, waiting for welcome message...
Response: 220 ProFTPD 1.3.5b Server (FTP) [::ffff:10.0.0.1]
Command: USER micko
Response: 331 Password required for micko
Command: PASS ************
Response: 530 Login incorrect.
Error: Critical error: Could not connect to server
This is what I get from id micko
id micko
uid=2004(micko) gid=63000(allusers) groups=63000(allusers),60000(openvpn_plugin),60001(user_certificates_plugin),1000513(domain_users),60003(ftp_plugin),60004(ftbac)
The share is shared with the group ftbac which I am apart of.
I have reset the password
I have deleted and recreated the user
I can log into the web interface with the user
Can some guidance on what to do would be great because I am pulling my hair out here trying to figure out why it won't work.
Even on my local network it still refuses to connect.
This is from FileZilla
Status: Connecting to 10.0.0.1:990...
Status: Connection established, initializing TLS...
Status: Verifying certificate...
Status: TLS connection established, waiting for welcome message...
Response: 220 ProFTPD 1.3.5b Server (FTP) [::ffff:10.0.0.1]
Command: USER micko
Response: 331 Password required for micko
Command: PASS ************
Response: 530 Login incorrect.
Error: Critical error: Could not connect to server
This is what I get from id micko
id micko
uid=2004(micko) gid=63000(allusers) groups=63000(allusers),60000(openvpn_plugin),60001(user_certificates_plugin),1000513(domain_users),60003(ftp_plugin),60004(ftbac)
The share is shared with the group ftbac which I am apart of.
I have reset the password
I have deleted and recreated the user
I can log into the web interface with the user
Can some guidance on what to do would be great because I am pulling my hair out here trying to figure out why it won't work.
In Flexshare
Share this post:
Responses (8)
-
Accepted Answer
Hi Nick,
Still the same issue, it does prompt me for a certificate but still fails.
I reset the password to '123456' and 'password' and still both don't allow me to connect.
Status: Connecting to 10.0.0.1:21...
Status: Connection established, waiting for welcome message...
Status: Initializing TLS...
Status: Verifying certificate...
Status: TLS connection established.
Command: USER micko
Response: 331 Password required for micko
Command: PASS ************
Response: 530 Login incorrect.
Error: Critical error: Could not connect to server -
Accepted Answer
Can you stick with port 21 and no encryption while testing as it removes a couple of variables from the equation?
I must say I am struggling with this one. My FTP access works fine with port 21 and 990. 990 gives me a certificate prompt with WinSCP but then connects. 21 works directly.
Do you have any non-alpha-numeric characters in micko's password? If you do, can you test with a basic password? -
Accepted Answer
Hi Nick,
I have installed and initialised the Windows Networking and still the same error message.
Status: Connecting to 10.0.0.1:990...
Status: Connection established, initializing TLS...
Status: Verifying certificate...
Status: TLS connection established, waiting for welcome message...
Response: 220 ProFTPD 1.3.5b Server (FTP) [::ffff:10.0.0.1]
Command: USER micko
Response: 331 Password required for micko
Command: PASS ************
Response: 530 Login incorrect.
Error: Critical error: Could not connect to server -
Accepted Answer
-
Accepted Answer
-
Accepted Answer
-
Accepted Answer
Hi Nick,
FTP enabled.
The contents of flex-990.conf is as follows:
#----------------------------------------------------------------
# WARNING: This file is automatically created by webconfig.
#----------------------------------------------------------------
<VirtualHost 1.41.6.14 10.0.0.1>
Port 990
DefaultRoot /var/flexshare/shares/
RequireValidShell off
AuthPam on
AuthPAMConfig proftpd
PassivePorts 60000 60999
CapabilitiesEngine on
CapabilitiesSet +CAP_CHOWN
<Limit LOGIN CDUP PWD XPWD LIST PROT PASV>
AllowAll
</Limit>
<Limit ALL>
DenyAll
</Limit>
<IfModule mod_tls.c>
TLSEngine on
TLSLog /var/log/tls.log
TLSOptions NoCertRequest UseImplicitSSL
TLSRequired off
TLSRSACertificateFile /etc/pki/CA/bootstrap.crt
TLSRSACertificateKeyFile /etc/pki/CA/bootstrap.key
TLSVerifyClient off
</IfModule>
# DNR:Webconfig start - plexupload
<Directory /var/flexshare/shares/plexupload>
AllowOverwrite on
AllowRetrieveRestart on
AllowStoreRestart on
DisplayChdir .flexshare-group.txt TRUE
HideNoAccess on
HideFiles (.flexshare)
GroupOwner "ftbac"
Umask 0113 0002
<Limit CWD READ WRITE DIRS PORT QUIT PASV>
AllowGroup "ftbac"
IgnoreHidden on
</Limit>
<Limit ALL>
DenyAll
</Limit>
</Directory>
# DNR:Webconfig end - plexupload
</VirtualHost>
Here is filezilla's reply on port 21
Status: Connecting to 10.0.0.1:21...
Status: Connection established, waiting for welcome message...
Status: Initializing TLS...
Status: Verifying certificate...
Status: TLS connection established.
Command: USER micko
Response: 331 Password required for micko
Command: PASS ************
Response: 530 Login incorrect.
Error: Critical error: Could not connect to server -
Accepted Answer
Please login to post a reply
You will need to be logged in to be able to post a reply. Login using the form on the right or register an account if you are new here.
Register Here »