Trying to install ClearOS 7.2 on an HP SE316M1 with a P400 RAID controller... during the install I get to where to install but the LUN does not show.
is there anything special I need to do ?
thanks for your time and experience in advance.
is there anything special I need to do ?
thanks for your time and experience in advance.
Share this post:
Responses (8)
-
Accepted Answer
Hardware RAID support is very limited on ClearOS. See this documentation
You have to find out if you card is supported on RHEL or CentOS.
A other option is to use software RAID but then you have to disable the hardware RAID controller.
Edit: Matthew, welcome to the ClearOS Forums! -
Accepted Answer
A quick google for "P400 RAID controller linux driver" turns up this. As a suggestion, there may be another hybrid solution. Start off with his method to get through the installation then install the kmod-cciss driver which I have compiled here, but I give no guarantees that this will work. The cciss driver is the original driver for the card which RedHat removed from EL7 and Elrepo have now provided. -
Accepted Answer
-
Accepted Answer
-
Accepted Answer
Were you able to get COS 7 up and going? This page may be helpful for your p400:
http://cciss.sourceforge.net/
or perhaps this one:
http://elrepo.org/linux/elrepo/el7/x86_64/RPMS/.
modinfo cciss results in "not found" and I don't guess hpsa covers the p400 (per above) so loading cciss may work for you. -
Accepted Answer
-
Accepted Answer
Please login to post a reply
You will need to be logged in to be able to post a reply. Login using the form on the right or register an account if you are new here.
Register Here »