Have 2 sites - have 2 ClearOS 6.6 Community boxes - 1 at each
Site 1 - Lan Subnet of 192.168.1.x
Site 2 - Lan Subnet of 10.2.0.x
Each site has an internet connection marked external on each box - Internet works at each site
But I've got a pair of AirFibers hung that connect the 2 sites
Right now I can not see either site from the other
can someone tell me how I should have ClearOS setup to use the airfiber network to connect my 2 sites ?
Right now they are on a 10.10.10.x subnet and set to LAN in ClearOS and it's not working
Thanks
Barry
Site 1 - Lan Subnet of 192.168.1.x
Site 2 - Lan Subnet of 10.2.0.x
Each site has an internet connection marked external on each box - Internet works at each site
But I've got a pair of AirFibers hung that connect the 2 sites
Right now I can not see either site from the other
can someone tell me how I should have ClearOS setup to use the airfiber network to connect my 2 sites ?
Right now they are on a 10.10.10.x subnet and set to LAN in ClearOS and it's not working
Thanks
Barry
Share this post:
Responses (2)
-
Accepted Answer
I don't know exactly how the AirFibers work. I've had a quick look at a manual and it is not obvious as a network bridge. Are you able to set one up with an IP address on the Site 1 LAN and one on Site 2 LAN. If you can, the next step would be to set a route in Site A ClearOS to 10.2.0.x via Site 1 Airfiber and a similar route on Site 2 to 192.168.1.x via the site 2 Airfiber. I am not certain as I don't know if the AirFibers will work like this. -
Accepted Answer
Please login to post a reply
You will need to be logged in to be able to post a reply. Login using the form on the right or register an account if you are new here.
Register Here »