Issue
USB 3 supported ...?
Does anyone know if the BMB has a USB version limitation? I've a WD Elements 107C external drive that works quite happily when plugged into a USB 2 port, but is unrecognised when plugged into a USB 3 port. I can see the drive using cfdisk and it's initialised (which I did whilst it was plugged into a USB 2 port) from a shell, so I know it's been recognised by the kernel.
Share this post:
Responses (4)
-
Accepted Answer
-
Accepted Answer
Does it fail to recognize the device after a reboot and having never attached to the other device? I ask because there is a potential issue with locked UUIDs from it being disconnected. That is, connected to USB 2.0, removed without dismount, connected to USB 3.0.
Let me know if it is still an issue after a fresh restart and only connected to USB 3.0. There should not be a limitation.
Please login to post a reply
You will need to be logged in to be able to post a reply. Login using the form on the right or register an account if you are new here.
Register Here »